Mubychem Limited of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. Our suppliers have accreditations like FDA - GMP approval, ISO-9001:2008, ISO-22000:2005 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia ACS AR Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for oil well drilling fracking fracturing and others.
Calcium Sulfate USP, Calcium Sulphate BP & Commercial Pure Manufacturers, CaSO4
Calcium Sulfate Sulphate Manufacturers
Calcium Sulfate Sulphate USP ACS BP IP Analytical reagent FCC Food grade Manufacturers
For MSDS Sheet Click MSDS of Calcium Sulfate Sulphate BP USP IP ACS Analytical Reagent FCC Food grade Manufacturers
We offer Calcium Sulfate Commercial Pure & Pharmacopoeia grade.
Calcium Sulphate as per British Pharmacopoeia 2009
Calcium Sulphate Dihydrate BP Calcium Sulphate BP Dihydrate
CaSO4,2H2O ... 172.2
Action and use
98.0 per cent to 102.0 per cent of CaSO4,2H2O i.e. Calcium Sulphate Dihydrate or Calcium Sulfate Dihydrate.
White or almost white fine powder.
Very slightly soluble in water, practically insoluble in ethanol (96 per cent).
Loss on ignition.
Solution S gives reaction of sulphates.
Solution S gives reaction of calcium.
Dissolve 1.0 g in 50 ml of a 10 per cent V/V solution of hydrochloric acid R by heating at 50°C for 5 min. Allow to cool.
Acidity or alkalinity
Shake 1.5 g with 15 ml of carbon dioxide-free water for 5 min. Allow to stand for 5 min and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution and 0.25 ml of 0.01 M sodium hydroxide . The solution is red. Add 0.30 ml of 0.01 M hydrochloric acid . The solution is colourless. Add 0.2 ml of methyl red solution. The solution is reddish-orange.
Maximum 300 ppm.
Shake 0.5 g with 15 ml of water R for 5 min. Allow to stand for 15 min and filter. Dilute 5 ml of the filtrate to 15 ml with water.
Maximum 10 ppm, determined on 5 ml of solution S.
Maximum 100 ppm.
To 0.25 g add a mixture of 5 ml of hydrochloric acid R and 20 ml of water R . Heat to boiling, cool and filter.
Maximum 20 ppm.
To 2.5 g add a mixture of 2 ml of hydrochloric acid R and 15 ml of water R . Heat to boiling. Cool and then add 0.5 ml of phenolphthalein solution R . Cautiously add concentrated ammonia until the colour changes to pink. Add 0.5 ml of glacial acetic acid R and dilute to 25 ml with water R . Filter. 12 ml of the filtrate complies with test A. Prepare the reference solution using lead standard solution (2 ppm Pb.
Loss on ignition
18.0 per cent to 22.0 per cent, determined on 1.000 g by ignition to constant mass at 800 ± 50C.
Dissolve 0.150 g in 120 ml of water. Carry out the complex o metric titration of calcium.
1 ml of 0.1 M sodium edetate is equivalent to 17.22 mg of CaSO4,2H2O.
Calcium Sulfate USP
Sulfuric acid, calcium salt (1:1)
Calcium sulfate (1:1) 136.14
Calcium Sulfate is anhydrous or contains two molecules of water of hydration. It contains not less than 98.0 percent and not more than 101.0 percent of CaSO4 i.e. Calcium Sulfate or Calcium Sulphate, calculated on the dried basis.
Labeling— Label it to indicate whether it is Calcium Sulfate anhydrous or the Calcium Sulphate dihydrate.
Identification— Dissolve about 200 mg by warming in a mixture of 4 mL of 3 N hydrochloric acid and 16 mL of water. This solution responds to the tests for Calcium and for Sulfate.
Loss on drying— Dry it at a temperature not lower than 250 to constant weight: the anhydrous form loses not more than 1.5% of its weight, and the dihydrate loses between 19.0% and 23.0% of its weight.
Iron— Dissolve 100 mg in 8 mL of 3 N hydrochloric acid, and dilute with water to 47 mL: the limit is 0.01%.
Heavy metals— Mix 2.0 g with 20 mL of water, add 25 mL of 3 N hydrochloric acid, and heat to boiling to dissolve the test specimen. Cool, and add ammonium hydroxide to a pH of 7. Filter, evaporate to a volume of about 25 mL, and re-filter, if necessary, to obtain a clear solution: the limit is 0.001%.
Assay— Dissolve about 300 mg accurately weighed, in 100 mL of water and 4 mL of 3 N hydrochloric acid. Boil, if necessary, to dissolve, and cool before titrating. While stirring, preferably with a magnetic stirrer, add, in the order named, 0.5 mL of triethanolamine, 300 mg of hydroxy naphthol blue, and, from a 50-mL burette, about 30 mL of 0.05 M edetate disodium VS. Add sodium hydroxide solution (45 in 100) until the initial red color changes to clear blue. Continue to add it drop wise until the color changes to violet, and add an additional 0.5 mL. The pH is between 12.3 and 12.5. Continue the titration drop wise with 0.05 M edetate disodium VS to the appearance of a clear-blue endpoint that persists for not less than 60 seconds. Each mL of 0.05 M edentate disodium is equivalent to 6.807 mg of CaSO4.
Calcium Sulfate FCC as per US Food Chemical Codex FCC
CaSO4 Formula wt, anhydrous 136.14
CaSO4·2H2O Formula wt, dihydrate 172.18
INS: 516 CAS: anhydrous [7778-18-9]
CAS: dihydrate [10101-41-4]
Calcium Sulfate occurs as a fine, white to slightly yellow-white powder. It is anhydrous or contains two molecules of water of hydration.
Function Nutrient; yeast food; dough conditioner; firming agent; sequestrant.
Identification: Dissolve about 200 mg of sample by warming it with a mixture of 4 mL of 2.7 N hydrochloric acid and 16 mL of water. A white precipitate forms when 5 mL of ammonium oxalate TS is added to 10 mL of the solution. Upon the addition of barium chloride TS to the remaining 10 mL, a white precipitate forms that is insoluble in hydrochloric and nitric acids.
Assay: Not less than 98.0% of CaSO4 i.e. Calcium Sulphate, calculated on the dried basis.
Fluoride: Not more than 0.003%.
Lead: Not more than 2 mg/kg.
Loss on Drying Anhydrous: Not more than 1.5%; Dihydrate: Between 19.0% and 23.0%.
Selenium: Not more than 0.003%.
Assay Dissolve 250 mg of sample, accurately weighed, in 100 mL of water and 4 mL of 2.7 N hydrochloric acid, boil to effect solution, and cool. While stirring, preferably with a magnetic stirrer, add about 30 mL of 0.05 M disodium EDTA from a 50-mL burette, then add 25 mL of 1 N sodium hydroxide and 300 mg of hydroxy naphthol blue indicator, and continue the titration to a blue endpoint. Each milliliter of 0.05 M disodium EDTA is equivalent to 6.807 mg of CaSO4.
Reagent: Calcium Sulphate Dihydrate as per ACS specifications
American Chemical Society Reagent Grade
Calcium Sulfate ACS Dihydrate
Also Called Calcium Sulphate Dihydrate
CaSO4 . 2H2O
Formula Wt 172.17
CAS Number 10101-41-4
Assay: 98.0-102.0% CaSO4 . 2H2O
Insoluble in dilute hydrochloric acid: 0.02%
Chloride (Cl): 0.005%
Nitrate (NO3): Passes test
Carbonate (CO3): Passes test
Heavy metals (as Pb): 0.002%
Iron (Fe): 0.001%
Magnesium (Mg): 0.02%
Potassium (K): 0.005%
Sodium (Na): 0.02%
Strontium (Sr): 0.05%
Calcium Sulphate BP Calcium Sulfate USP Dihydrate Hemihydrate Anhydrous manufacturers:
Muby Chem Ltd.
Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: email@example.com
Europe Africa Asia India Mumbai e-mail: firstname.lastname@example.org
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Chemical Products offered ex-stock. Any quantity. Container loads to pallets or packs
Other Ex-stock Chemicals Offered
Ammonium Chloride with/without anti caking agent Crystals & Granules
Ammonium Persulfate oxidizing gel breaker
Calcium Nitrite Crystals & 30% Solution Calcium Nitrate
Ceric Ammonium Nitrate
Magnesium Chloride Anhydrous & Hexahydrate FCC USP
Magnesium Sulfate Anhydrous & Heptahydrate
Polycarboxylate Super plasticizer, Water Reducer Concrete Strengthener
Sodium Acetate Anhydrous & Trihydrate crystals & granular
Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Crystals & Solution
Sodium Thiosulfate FCC Anhydrous & Pentahydrate Photographic
Zinc Chloride Anhydrous & Liquid Solution 62.5%, 67% 70%
Zinc Ammonium Chloride Galvanizing Flux Powder Nuggets, & Liquid Solution-
Acid Inhibitor cum Fume Suppressant & Flux Enhancer
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.