Mubychem Limited of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. Our suppliers have accreditations like FDA - GMP approval, ISO-9001:2008, ISO-22000:2005 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia ACS AR Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for oil well drilling fracking fracturing and others.
Magnesium Sulphate BP Magnesium Sulfate USP FCC Food grade ACS Manufacturers, MgSO4
Magnesium Sulfate Sulphate Heptahydrate Anhydrous
Magnesium Sulphate BP IP Magnesium Sulfate USP ACS AR Analytical Reagent FCC Food Grade Manufacturers
MSDS of Magnesium Sulfate Sulphate Anhydrous Manufacturers
MSDS of Magnesium Sulfate Sulphate Heptahydrate BP IP USP ACS AR Analytical Reagent FCC Food grade Manufacturers
Magnesium Sulfate Magnesium Sulphate
Dried Magnesium Sulphate
Dried Magnesium Sulphate BP ( Magnesium Sulfate )
Dried Epsom Salts or Magnesium Sulphate Dried
Magnesium Sulphate Paste
Dried Magnesium Sulphate contains not less than 62.0% and not more than 70.0% of MgSO4.
It may be prepared by drying magnesium sulphate at 100° until it has lost approximately 25% of its weight.
A white powder.
Freely soluble in water; dissolves more rapidly in hot water.
Yields the reactions characteristic of magnesium salts and of sulphates.
Acidity or alkalinity
To 10 ml of a 7.5% w/v solution in carbon dioxide-free water add 0.05 ml of phenol red solution. Not more than 0.2 ml of either 0.01M hydrochloric acid VS or 0.01M sodium hydroxide VS is required to change the colour of the solution.
0.33 g dissolved in 25 ml of water complies with the limit test for arsenic, (3 ppm).
Dissolve 1.3 g in 20 ml of water and add 1 g of ammonium chloride. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution(1 ppm Pb) to prepare the standard (15 ppm).
0.33 g dissolved in 10 ml of water complies with the limit test for iron, Appendix VII (30 ppm).
0.13 g dissolved in 15 ml of water complies with the limit test for chlorides, Appendix VII (400 ppm).
7.5 g dissolves in 20 ml of water, producing a solution which may be slightly turbid at first but which becomes clear in a few minutes.
British Pharmacopoeia 2009
Magnesium Sulphate Heptahydrate BP (Magnesium Sulphate Heptahydrate )
MgSO4,7H2O 246.5 10034-99-8
Action and use
Osmotic laxative; used in treatment of electrolyte deficiency.
99.0 per cent to 100.5 per cent (dried substance).
White or almost white, crystalline powder or brilliant, colourless crystals.
Freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent).
A. It gives the reactions of sulphates.
B. It gives the reaction of magnesium.
Dissolve 5.0 g in water R and dilute to 50 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 10 ml of solution S add 0.05 ml of phenol red solution. Not more than 0.2 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide is required to change the colour of the indicator.
Maximum 300 ppm.
Maximum 2 ppm, determined on 0.5 g.
Maximum 20 ppm.
Maximum 10 ppm.
Loss on drying
48.0 per cent to 52.0 per cent, determined on 0.500 g by drying in an oven at 110-120°C for 1 h and then at 400°C to constant mass.
Magnesium Sulfate USP
Sulfuric acid magnesium salt (1:1), hydrate.
Magnesium sulfate (1:1) monohydrate 138.36
Magnesium sulfate (1:1) heptahydrate 246.48 [10034-99-8].
Anhydrous 120.37 [7487-88-9].
Magnesium Sulfate, rendered anhydrous by ignition, contains not less than 99.0 percent and not more than 100.5 percent of MgSO4.
Identification— A solution (1 in 20) responds to the tests for Magnesium and for Sulfate.
pH: between 5.0 and 9.2, in a solution (1 in 20).
Loss on drying— Dry it at 105 for 2 hours: the anhydrous form loses not more than 2% of its weight.
Loss on ignition— Weigh accurately about 1 g in a crucible, heat at 105 for 2 hours, then ignite in a muffle furnace at 450 ± 25 to constant weight: the monohydrate loses between 13.0% and 16.0% of its weight, the dried form loses between 22.0% and 28.0% of its weight, and the heptahydrate loses between 40.0% and 52.0% of its weight.
Chloride— A 1.0-g portion shows no more chloride than corresponds to 0.20 mL of 0.020 N hydrochloric acid (0.014%).
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING NON-PARENTERAL DOSAGE FORMS—
Dissolve 0.50 g in 40 mL of water and proceed as directed in the test for Iron: the limit is 20 µg per g.
FOR MAGNESIUM SULFATE INTENDED FOR USE IN PREPARING PARENTERAL DOSAGE FORMS— the limit is 0.5 µg per g.
Heavy metals— Dissolve 2 g in 25 mL of water: the limit is 0.001%.
Selenium— The limit is 0.003%.
Magnesium Sulfate FCC Magnesium Sulphate
MgSO4·xH2O Formula wt, monohydrate 138.38
Formula wt, heptahydrate 246.47
INS: 518 CAS: monohydrate [14168-73-1]
CAS: heptahydrate [10034-99-8]
CAS: dried [15244-36-7]
Magnesium Sulfate occurs as a colorless crystal or a granular crystalline powder. It is produced with one or seven molecules of water of hydration or in a dried form containing the equivalent of about 2.3 waters of hydration. It is readily soluble in water, slowly soluble in glycerin, and sparingly soluble in alcohol.
Identification: A 1:20 aqueous solution gives positive tests for Magnesium and for Sulfate.
Assay: Not less than 99.5% of MgSO4 after ignition.
Lead: Not more than 4 mg/kg.
Loss on Ignition Monohydrate: Between 13.0% and 16.0%; Heptahydrate: Between 40.0% and 52.0%; Dried: Between 22.0% and 28.0%.
Selenium: Not more than 0.003%.
Dried Epsom Salts or Magnesium Sulphate Dried is also offered.
Magnesium Sulfate ACS ( Magnesium Sulphate )
Magnesium Sulfate Heptahydrate
MgSO4 . 7H2O
Formula Wt 246.48
CAS Number 10034-99-8
Assay .............. 98.0-102.0% MgSO4-7H2O
pH of a 5% solution- 5.0-8.2 at 25C
Insoluble matter ... 0.005%
Chloride (Cl) ...... 5 ppm
Nitrate (NO3) ...... 0.002%
Ammonium (NH4) ..... 0.002%
Calcium (Ca) ....... 0.02%
Manganese (Mn) ..... 5 ppm
Potassium (K) ...... 0.005%
Sodium (Na) ........ 0.005%
Strontium (Sr) ..... 0.005%
Heavy metals (as Pb) 5 ppm
Iron (Fe) .......... 5 ppm
Magnesium Sulphate BP Magnesium Sulfate USP FCC Food grade ACS manufacturers:
Muby Chem Ltd.
Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: email@example.com
Europe Africa Asia India Mumbai e-mail: firstname.lastname@example.org
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Chemical Products offered ex-stock. Any quantity. Container loads to pallets or packs
Other Ex-stock Chemicals Offered
Ammonium Chloride with/without anti caking agent Crystals & Granules
Ammonium Persulfate oxidizing gel breaker
Calcium Nitrite Crystals & 30% Solution Calcium Nitrate
Ceric Ammonium Nitrate
Magnesium Chloride Anhydrous & Hexahydrate FCC USP
Magnesium Sulfate Anhydrous & Heptahydrate
Polycarboxylate Super plasticizer, Water Reducer Concrete Strengthener
Sodium Acetate Anhydrous & Trihydrate crystals & granular
Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Crystals & Solution
Sodium Thiosulfate FCC Anhydrous & Pentahydrate Photographic
Zinc Chloride Anhydrous & Liquid Solution 62.5%, 67% 70%
Zinc Ammonium Chloride Galvanizing Flux Powder Nuggets, & Liquid Solution-
Acid Inhibitor cum Fume Suppressant & Flux Enhancer
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.