Mubychem Limited of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. Our suppliers have accreditations like FDA - GMP approval, ISO-9001:2008, ISO-22000:2005 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia ACS AR Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for oil well drilling fracking fracturing and others.
Calcium Hydroxide Pure & BP USP ACS Analytical Reagent FCC Food grade Manufacturers, Ca(OH)2
Synthetic Calcium Hydroxide is also offered
Calcium Hydroxide Manufacturers
MSDS of Calcium Hydroxide BP USP IP FCC ACS Analytical Reagent Food grade Manufacturers
Specifications & Grades of Hydrated Lime or Slaked Lime or Calcium Hydroxide:
Grades A1++ ___ A1+ ____ A+ % of available lime as Ca(OH)2 96±1 ___ 94 _____ 93 Active CaO(%) 72.5 ___ 71 _____ 70 Acid insolubles (max.)% 0.10 ___ 0.2 ____ 0.4 Iron 150ppm _ 200ppm _ 250ppm Alumina ------ In traces ------ Magnesia as MgO (max.)% 0.5 ____ 0.55 ___ 0.6 Mesh (BSS) 500 ____ 400 ____ 350 Packing Laminated. PP/ HDPE Bags with an extra HMHDP liner or in drums or as required by the buyer.
Calcium Hydroxide BP British Pharmacopoeia
Ca(OH)2 ... 74.1Preparation
Calcium Hydroxide Solution
95.0 per cent to 100.5 per cent.
White or almost white, fine powder.
Practically insoluble in water.
A. To 0.80 g in a mortar, add 10 ml of water R and 0.5 ml of phenolphthalein solution and mix. The suspension turns red. On addition of 17.5 ml of 1 M hydrochloric acid , the suspension becomes colourless without effervescing. The red colour occurs again when the mixture is triturated for 1 min. On addition of a further 6 ml of 1 M hydrochloric acid and triturating, the solution becomes colourless.
B. Dissolve about 0.1 g in dilute hydrochloric acid and dilute to 10 ml with water . 5 ml of the solution give reaction of calcium.
Matter insoluble in hydrochloric acid
Maximum 0.5 per cent.
Dissolve 2.0 g in 30 ml of hydrochloric acid. Boil the solution and filter. Wash the residue with hot water. The residue weighs a maximum of 10 mg.
Maximum 5.0 per cent of CaCO3.
Maximum 330 ppm.
Maximum 0.4 per cent.
Maximum 4 ppm.
Magnesium and alkali metals
Maximum 4.0 per cent calculated as sulphates.
Maximum 20 ppm.
To 1.500 g in a mortar, add 20-30 ml of water R and 0.5 ml of phenolphthalein solution. Titrate with 1 M hydrochloric acid by triturating the substance until the red colour disappears. The final solution is used in the tests for carbonates.
1 ml of 1 M hydrochloric acid is equivalent to 37.05 mg of Ca(OH)2.
Calcium Hydroxide USP Ca(OH)2
Calcium Hydroxide contains not less than 95.0 percent and not more than 100.5 percent of Ca(OH)2.
Packaging and storage Preserve in tight containers.
A: When mixed with from three to four times its weight of water, it forms a smooth magma. The clear, supernatant from the magma is alkaline to litmus.
B: Mix 1 g with 20 mL of water, and add sufficient 6 N acetic acid to effect solution: the resulting solution responds to the tests for Calcium.
Limit of acid-insoluble substances Dissolve 2.0 g in 30 mL of 4 N hydrochloric acid, and heat to boiling. Filter the mixture, wash the residue with hot water, and ignite: the weight of the residue does not exceed 10 mg (0.5%).
Carbonate Mix 2 g with 50 mL of water: the addition of an excess of 3 N hydrochloric acid to the mixture does not cause more than a slight effervescence.
Heavy metals Dissolve 2.0 g in 20 mL of 3 N hydrochloric acid, and evaporate on a steam bath to dryness. Dissolve the residue in 20 mL of water, and filter. Dilute the filtrate with water to 40 mL, and to 20 mL of the resulting solution add 1 mL of 0.1 N hydrochloric acid, then add water to make 25 mL: the limit is 20 6g per g.
Limit of magnesium and alkali salts Dissolve 0.50 g in a mixture of 30 mL of water and 10 mL of 3 N hydrochloric acid, and proceed as directed in the test for Magnesium and alkali salts under Calcium Carbonate, beginning with heat the solution, and boil for 1 minute. The weight of the residue does not exceed 12 mg (4.8%).
Assay Transfer about 1.5 g of Calcium Hydroxide, accurately weighed, to a beaker, and gradually add 30 mL of 3 N hydrochloric acid. When the solution is dissolved, transfer it to a 500-mL volumetric flask, rinse the beaker thoroughly, adding the rinsing to the flask, dilute with water to volume, and mix. Pipette 50 mL of the solution into a suitable container, add 100 mL of water, 15 mL of 1 N sodium hydroxide, and 300 mg of hydroxy naphthol blue, and titrate with 0.05 M edentate disodium VS to a blue endpoint. Each mL of 0.05 M edetate disodium is equivalent to 3.705 mg of Ca(OH)2.
Calcium Hydroxide FCCSlaked Lime
Ca(OH)2 Formula wt 74.10
INS: 526 CAS: [1305-62-0]
Calcium Hydroxide occurs as a white powder. One gram dissolves in 630 mL of water at 25°, and in 1300 mL of boiling water. It is soluble in glycerin and in a saturated solution of sucrose but insoluble in alcohol.
Function: Buffer; neutralizing agent; firming agent.
A. Mix a sample with from 3 to 4 times its weight of water. The sample forms a smooth magma. The clear, supernatant liquid from the magma is alkaline to litmus.
B. Mix 1 g of sample with 20 mL of water, and add sufficient glacial acetic acid to effect solution. The resulting solution gives positive tests for Calcium.
Assay: Not less than 95.0% and not more than 100.5% of Ca(OH)2.
Acid-Insoluble Substances: Not more than 0.5%.
Arsenic: Not more than 3 mg/kg.
Carbonate: Passes test.
Fluoride: Not more than 0.005%.
Lead: Not more than 2 mg/kg.
Magnesium and Alkali Salts: Not more than 4.8%.
Calcium Hydroxide ACSCa(OH)2
Formula Wt 74.09
CAS Number 1305-62-0
Assay: 95.0% Ca(OH)2 and 3.0% CaCO3
Insoluble in hydrochloric acid: 0.03%
Chloride (Cl): 0.03%
Sulfur compounds (as SO4): 0.1%
Heavy metals (as Pb): 0.003%
Iron (Fe): 0.05%
Magnesium (Mg): 0.5%
Potassium (K): 0.05%
Sodium (Na): 0.05%
Strontium (Sr): 0.05%
Synthetic Precipitated Calcium Hydroxide
Please enquire by specifying your desired specifications
Calcium Hydroxide BP USP Slaked Lime Hydrated Lime Manufacturers;
Muby Chem Ltd.
Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: email@example.com
Europe Africa Asia India Mumbai e-mail: firstname.lastname@example.org
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals
Chemical Products offered ex-stock. Any quantity. Container loads to pallets or packs
Other Ex-stock Chemicals Offered
Ammonium Chloride with/without anti caking agent Crystals & Granules
Ammonium Persulfate oxidizing gel breaker
Calcium Nitrite Crystals & 30% Solution Calcium Nitrate
Ceric Ammonium Nitrate
Magnesium Chloride Anhydrous & Hexahydrate FCC USP
Magnesium Sulfate Anhydrous & Heptahydrate
Polycarboxylate Super plasticizer, Water Reducer Concrete Strengthener
Sodium Acetate Anhydrous & Trihydrate crystals & granular
Sodium Formaldehyde Bisulfite
Sodium Nitrite Nitrate Crystals & Solution
Sodium Thiosulfate FCC Anhydrous & Pentahydrate Photographic
Zinc Chloride Anhydrous & Liquid Solution 62.5%, 67% 70%
Zinc Ammonium Chloride Galvanizing Flux Powder Nuggets, & Liquid Solution-
Acid Inhibitor cum Fume Suppressant & Flux Enhancer
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.