Dihydroxyaluminum Aminoacetate USP Aluminium Glycinate BP Ph Eur Suppliers & Manufacturers |
| Mubychem Limited of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. |
| Our suppliers have accreditations like FDA - GMP-GLP approval, ISO-9001, ISO-22000 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for Oil well drilling fracking fracturing and others. |
----- 
SDS MSDS of Dihydroxyaluminum Aminoacetate USP Aluminium Glycinate BP Ph Eur Manufacturers
Dihydroxyaluminum Aminoacetate
Aluminium Glycinate USP BP Ph Eur CAS Number 41354-48-7 or 13682-92-3, Commercial & Pure
We supply as under:
Dihydroxyaluminum Aminoacetate
Dihydroxyaluminum Sodium Carbonate.
Specifications of Dihydroxyaluminum Aminoacetate USP Grade
C2H6AlNO4.xH2O
Aluminum, (glycinato-N,O)dihydroxy-, hydrate.
(Glycinato)dihydroxyaluminum hydrate CAS 41354-48-7
Anhydrous 135.06 CAS 13682-92-3
Dihydroxyaluminum Aminoacetate yields not less than 94.0 percent and not more than 102.0 percent of dihydroxyaluminum aminoacetate (C2H6AlNO4), calculated on the dried basis. It may contain small amounts of aluminum oxide and of Aminoacetic Acid.
Identification: ;Suspend 1 g in 25 mL of water, add hydrochloric acid, dropwise, until a clear solution is formed, and divide it into two equal parts for the following tests.
A: One portion of the solution responds to the tests for Aluminum.
B: To the other portion of the solution add 1 drop of liquefied phenol and 5 mL of sodium hypochlorite: a blue color is produced.
pH: between 6.5 and 7.5, in a suspension of 1 g of it, finely powdered, in 25 mL of water.
Loss on drying: Dry it at 130C to constant weight: it loses not more than 14.5% of its weight.
Mercury: the limit is 1 ppm.
Isopropyl alcohol: Transfer about 5 g to a flask provided with a reflux condenser, and add 100 mL of potassium permanganate solution (1 in 300) and 10 mL of sulfuric acid. Reflux the mixture for 30 minutes, distill, and collect 10 mL of the distillate. To 1 mL of the distillate add 5 drops of sodium nitroferricyanide and 2 mL of 1 N sodium hydroxide, then add a slight excess of 6 N acetic acid: no red color is produced.
Nitrogen: Not less than 9.90% and not more than 10.60% of nitrogen is found.
Specifications of Aluminium Glycinate BP Grade
C2H6AlNO4-xH2O --- 135.1 --- CAS 41354-48-7
Action and use: Antacid.
DEFINITION
Aluminium Glycinate is a basic aluminium monoglycinate, partly hydrated. It contains not less than 34.5% and not more than 38.5% of Al2O3 and not less than 9.9% and not more than 10.8% of N, both calculated with reference to the dried substance.
CHARACTERISTICS
A white or almost white powder.
Practically insoluble in water and in organic solvents. It dissolves in dilute mineral acids and in aqueous solutions of the alkali hydroxides.
IDENTIFICATION
A. Add 0.1 g to 10 ml of a solution prepared by dissolving 0.84 g of citric acid in 8 ml of 1M sodium hydroxide and diluting to 20 ml with water. Add 0.5 ml of a 0.1% w/v solution of ninhydrin in methanol and warm. A purple colour is produced.
B. Suspend 1 g in 25 ml of 0.5M hydrochloric acid and heat gently until a clear solution is produced. Reserve half of the solution. To 2 ml of the solution add 0.15 ml of liquefied phenol , shake and add carefully without shaking 5 ml of dilute sodium hypochlorite solution. A blue colour is produced.
C. The solution reserved in test B yields the reaction characteristic of aluminium salts.
TESTS
Acidity or alkalinity: pH of a suspension of 1 g in 25 ml of carbon dioxide-free water, 6.5 to 7.5.
Neutralising capacity: Shake 0.2 g vigorously with 25 ml of 0.1M hydrochloric acid for 5 minutes and allow to stand for 5 minutes. The pH of the mixture is greater than 3.0.
Arsenic: Dissolve 2.0 g in 18 ml of brominated hydrochloric acid and 32 ml of water. 25 ml of the resulting solution complies with the limit test for arsenic, 1 ppm.
Heavy metals: Dissolve 1.5 g in 20 ml of 2M hydrochloric acid and 10 ml of water, add 0.5 ml of nitric acid and boil for about 30 seconds. Cool, add 2 g of ammonium chloride and 2 g of ammonium thiocyanate and extract with two 10 ml quantities of a mixture of equal parts of isoamyl alcohol and ether . To the aqueous layer add 2 g of citric acid. 12 ml of the resulting solution complies with limit test A for heavy metals, Appendix VII. Use lead standard solution (1 ppm Pb) to prepare the standard (20 ppm).
Mercuric salts: To pass the test.
Chloride: Dissolve 1.0 g in 10 ml of 2M nitric acid and dilute to 100 ml with water. 15 ml of the resulting solution complies with the limit test for chlorides, Appendix VII (330 ppm).
Loss on drying: When dried to constant weight at 130C, loses not more than 12.0% of its weight. Use 1 g.
Dihydroxyaluminum Aminoacetate USP Aluminium Glycinate BP Ph Eur Manufacturers:
Muby Chem Ltd.
Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: usa@mubygroup.com
Call 1-844-682-9243
Europe Africa Asia India Mumbai e-mail: info@mubygroup.com
Call +91-22-23774610
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.