Chromium Chloride or Chromic Chloride Pure & USP Grade Suppliers Exporters, CrCl3, CAS 10060-12-5 Hexahydrate, CAS 10025-73-7 Anhydrous |
| Muby Group of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Chromium Chloride or Chromic Chloride Hexahydrate, Anhydrous Pure and USP Grade, Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients and API as per IP BP Ph Eur EP CP JP USP NF FCC Food Grade as per monograph, Fragrance & flavor chemicals. Muby Group has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA. |
| Our suppliers have accreditations like FDA - GMP-GLP approval, ISO-9001, ISO-22000 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia API Excipients Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for Oil well drilling fracking fracturing and others. |
----- 
Chromium Chromic Chloride Manufacturers
Chromium Chloride Chromic Chloride USP Manufacturers
MSDS of Chromium Chloride Chromic Chloride USP Manufacturers
Chromic Chloride
Technical & Pure Crystals, Chromic Chloride Hexahydrate
Also USP Analytical Reagent Grades
Chromic Chloride or Chromium Chloride contains not less than 98.0 percent and not more than 101.0 percent of CrCl3·6H2O.
Insoluble matter—0.01%).
Substances not precipitated by ammonium hydroxide— (0.20% as sulfate).
Sulfate— (0.01%).
Iron— The limit is 0.01%.
Specifications of Chromic Chloride USP Chromium Chloride
CrCl3-6H2O 266.45
Chromium chloride (CrCl3) hexahydrate
Chromium(3+) chloride hexahydrate CAS 10060-12-5
Anhydrous 158.36 CAS 10025-73-7
Chromium Chloride - Chromic Chloride or Chromium Chloride contains not less than 98.0 percent and not more than 101.0 percent of CrCl3-6H2O
Identification:
A: To 5 mL of a solution (1 in 250) in a test tube add 1 mL of 5 N sodium hydroxide and 10 drops of 30 percent hydrogen peroxide, and heat gently for about 2 minutes: a yellow color develops.
B: To 5 mL of a solution (1 in 250) in a test tube add 5 drops of silver nitrate TS: a white, curd like precipitate is formed, and it is insoluble in nitric acid.
Insoluble matter— Transfer 10 g to a 250-mL beaker, add 100 mL of water, cover the beaker, and heat to boiling. Digest the hot solution on a steam bath for 30 minutes, and filter through a tarred filtering crucible of fine porosity. Rinse the beaker with hot water, passing the rinsing through the filter, and wash the filter with hot water until the last washing is colorless. Dry the filter at 105oC the weight of the residue does not exceed 1 mg (0.01%).
Substances not precipitated by ammonium hydroxide— Dissolve 2.0 g of Chromic Chloride or Chromium Chloride in 80 mL of water, heat the solution to boiling, and add a slight excess of ammonium hydroxide. Continue heating to remove the excess ammonia, cool, dilute with water to 100.0 mL, and mix. Pass through a retentive filter, and transfer 50.0 mL of the clear filtrate to an evaporating dish that previously has been ignited and tarred. Add 0.5 mL of sulfuric acid to the filtrate, evaporate on a steam bath to dryness, heat gently to remove the excess acid, and ignite gently: the weight of the residue does not exceed 2.0 mg (0.20% as sulfate).
Sulfate— Prepare a test solution by dissolving 2.0 g in 10 mL of water. Add 1 mL of 3 N hydrochloric acid, filter if necessary to obtain a clear solution, wash the filter with two 5-mL portions of water, and dilute with water to 40 mL. Prepare a control solution in a similar manner, but use 1.0 g of the substance under test, and after the filtration step add 0.10 mL of 0.020 N sulfuric acid. To each solution add 3 mL of barium chloride TS, mix, and allow to stand overnight. Decant most of the supernatants, without disturbing the precipitates, but leaving twice the volume of liquid in the control solution as in the test solution. Dilute each solution with water to 25 mL, and sonicate for 1 minute: any turbidity in the test solution does not exceed that in the control solution (0.01%).
Iron— Dissolve 1.0 g of Chromic Chloride or Chromium Chloride in 100 mL of water, and mix. Transfer 10 mL of this solution to a 100-mL color comparison tube, dilute with water to 45 mL, add 2 mL of hydrochloric acid, and mix (Test Preparation). Proceed as directed for Procedure, except to add 15 mL of butyl alcohol to the Test Preparation and the Standard Preparation at the same time that the Ammonium Thiocyanate Solution is added. Shake for 30 seconds, and allow the layers to separate: the color in the upper butyl alcohol layer from the Test Preparation is not darker than that from the Standard Preparation. The limit is 0.01%.
Assay— Dissolve about 0.4 g of Chromic Chloride or Chromium Chloride, accurately weighed, in 100 mL of water contained in a glass-stoppered, 500-mL conical flask, add 5 mL of 5 N sodium hydroxide, and mix. Pipette, slowly, 4 mL of 30 percent hydrogen peroxide into the flask, and boil the solution for 5 minutes. Cool the solution slightly, and add 5 mL of nickel sulfate solution (1 in 20). Boil the solution until no more oxygen is evolved, cool, and add 2 N sulfuric acid drop wise until the color of the solution changes from yellow to orange. Add to the flask a freshly prepared solution of 4 g of potassium iodide and 2 g of sodium bicarbonate in 100 mL of water, then add 6 mL of hydrochloric acid. Immediately insert the stopper in the flask, and allow to stand in the dark for 10 minutes. Rinse the stopper and the sides of the flask with a few mL of water, and titrate the liberated iodine with 0.1 N sodium thiosulfate VS to an orange color. Add 3 mL of starch TS, and continue the titration to a blue-green endpoint. Each mL of 0.1 N sodium thiosulfate is equivalent to 8.882 mg of CrCl3·6H2O.
Chromium Chloride or Chromic Chloride USP Manufacturers
Muby Group
Chemicals Suppliers, API and Excipient Suppliers, Toll manufacturing & Warehouse at Houston & Midland, Texas, USA and India
USA, Canada, Mexico Customers may e-mail: usa@mubygroup.com
Call 1-844-682-9243
Europe Africa Asia India Mumbai e-mail: info@mubygroup.com
Call +91-22-65290116
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Korea Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals | |
Refresh Yourself with these pleasant thoughts.
IT IS NICE TO BE IMPORTANT BUT ….... BUT IT IS MORE IMPORTANT TO BE NICE
If I give you “My Word” Nobody can undo it. If I sign an “Agreement” my Lawyer will undo it
Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe Korea Russia South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.
Copyright and Usual Disclaimer is Applicable.
If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.