Monoammonium Phosphate Monobasic Ammonium Phosphate Monobasic Manufacturers, SDS MSDS Sheet

Mubychem Limited of USA & India is a pioneer manufacturers suppliers exporters & importers of chemicals including Hydraulic fracturing stimulation & oil well production chemicals, Pharmaceutical excipients, Fragrance & flavor chemicals. Muby Chem Ltd has several manufacturing facilities and toll manufacturers across the globe. We have offices warehouses and representatives in Houston & Midland Texas and Chicago Illinois USA.

Our suppliers have accreditations like FDA - GMP-GLP approval, ISO-9001, ISO-22000 HACCP, Kosher & Halal Certification. We offer Commercial Pure Pharmacopoeia Analytical Reagent & Food Grade of Chemicals and do Toll Manufacturing for Oil well drilling fracking fracturing and others.

-----

Synonyms: Mono Ammonium Phosphate, Primary ammonium phosphate; ammonium dihydrogen phosphate; ammonium biphosphate; phosphoric acid monoammonium salt, Monobasic-Ammonium Phosphate, Monoammonium phosphate.
CAS No.: 7722-76-1
Molecular Weight: 115.04
Chemical Formula: NH4H2PO4

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Ingredient: Monoammonium Phosphate or Ammonium Phosphate Monobasic
CAS No.: 7722-76-1

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.

Fire: Mono Ammonium Phosphate is not considered to be a fire hazard. Fire may produce toxic fumes.
Explosion: Monoammonium Phosphate is not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture: nitrogen oxides (NOx), Oxides of phosphorus
Special Information: In the event of a fire over Monoammonium Phosphate, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

Ventilate area of leak or spill of Mono Ammonium Phosphate. Avoid dust formation. Avoid breathing vapours, mist or gas. Do not let product enter drains. Wear appropriate personal protective equipment. Spills: Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust.

Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect Monoammonium Phosphate against physical damage. Isolate Monoammonium Phosphate from incompatible substances. Containers may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

Airborne Exposure Limits: None established.
Ventilation System: In general, dilution ventilation is a satisfactory health hazard control for Monoammonium Phosphate. However, if conditions of use create discomfort to the worker, a local exhaust system should be considered.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

Appearance: Monoammonium Phosphate is brilliant white crystals or granules.
Odor: Monoammonium Phosphate has faint acid odor.
Solubility: Mono Ammonium Phosphate is soluble 1 g/2.5 ml water.
Specific Gravity: 1.80 for Monoammonium Phosphate
pH: 4.2
% Volatile by volume @ 21C (70F): 0
Boiling Point: No information found Mono Ammonium Phosphate
Melting Point: 190C (374F)
Vapor Density (Air=1): No information found.

Stability: Ammonium Phosphate Monobasic is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Monoammonium Phosphate on burning may produce ammonia and oxides of phosphorus.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Strong acids, Sodium hypochlorite.
Conditions to Avoid: Incompatibles.

Acute toxicity
LD50 Oral - rat - male and female - > 2.000 mg/kg
LD50 Dermal - rat - male and female - > 5.000 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.

Toxicity to fish: static test LC50 - Oncorhynchus mykiss (rainbow trout) - > 85,9 mg/l - 96 h
Environmental Fate: No information found

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of Mono Ammonium Phosphate may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose Monoammonium Phosphate container and unused contents in accordance with federal, state and local requirements.

DOT: Not regulated
TDG: Not regulated
IATA: Not regulated
IMDG/IMO: Not regulated
ADR/RID: Not regulated

USA:
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No, Reactivity: No (Pure / Solid)
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).

Disclaimer:
**********************************
Our company provides this Monoammonium Phosphate or Ammonium Phosphate Monobasic SDS Sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Mono Ammonium Phosphate or Monobasic Monoammonium Phosphate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
**********************************

Suppliers Manufacturers Exporters Importers between USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai China India etc.

If you feed a dog with your hand, it will never bite you. That is the principal difference between a dog and a man.